S4.5 To connect power to a module, There are three connections that have to be made. (1) Track Power (2) Accessory Power (3) LocoNet.
S4.5.1 LocoNet. For the LocoNet, a 4 foot RJ12 to RJ12 type straight through cable is utilized.
S4.5.2 Track Power buss. The Track bus gets its power from the rail A and B of the command station or booster, these must be a separate district than the DCC accessory power (either a separate booster, or a breaker).
S4.5.3 DCC Accessory buss. The DCC Accessory bus gets its power from the A and B rails of the command station or booster, these must be a separate district than the track power (either a separate booster, or a breaker).
NOTE: exact connection configuration will vary depending on the setup of the booster box, not all buses need to be powered from the same box, but all must be powered.
